MSM720 - Users have to refresh pages repeatedly before it finally loads
Using the default HP VSC controller. Have it access controlled and people can although there's been a few complaints about the same issue happening on the HP welcome page, most load it up just fine....
View ArticleMSM760 and validation users against AD/Radius
Been reading the documentation, but I must admit that I find it quite hard to understand in detail.I have been taking over the administration of a MSM760 - originally it has been set up to validate...
View ArticleRe: MSM760: No PMKID in association request
Hi,I think I found the document on HPE website. The title is HP MSM Wireless Products - Log Message "No PMKID found in association request" and I found it by searching for the docId from the URL on HPE...
View ArticleRe: MSM760 and validation users against AD/Radius
Ok, by trial and error I think that I now understand a bit of it.took a certificate from out webserver, uploaded it to the certificate store, and iPhones are now getting this certificate displayed on...
View ArticleRe: MSM760 and validation users against AD/Radius
Hi Lars,The radius + MSM760 can be a headache.The way radius is configured will decide how the connection authentication will work. EAP-TLS will require a certificate on the server and on the device....
View ArticleClik here to view.
Re: MSM760 and validation users against AD/Radius
Hi Craig... and thank you for your comment... yes, it is giving me quite much of a headache...I just want the MSM760 to validate users agains out Active Directory. Where to set the...
View ArticleRe: MSM760 and validation users against AD/Radius
Hi Lars,I just left mine all enabled and had to get our Packetfence NAC vendor to configure the radius server due to the complexity of our system.I could send you some config files but they may confuse...
View ArticleMSM 760 reboots unexpectedly
Helloi have a Problem with my MSM760 running Version 6.5.1.0-21733The MSM reboots unexpectedly. on one Day 3 Times and then after 3 Days, or after 7 DaysWe send the Log to a Syslog Server but i can`t...
View ArticleHP MSM460 -802.11n Dual Radio Access Point
Dear Team,Could you please provide the technical specifications of the MSM460 Acess Point? I am specifically interested in the antenna signal propagation (antenna patterns) - the azimuth and elevation...
View ArticleQuestion wireless controler
we haveat the momentan oldHPOnemodule(MSM765)as wireless controler.Thismanaged60APstrendrising.I readthecourseAruba appliances notwith theMSMAPsarecompatible.Does it makemore sense to...
View ArticleARP conflicts on a MSM760 controlled wireless network
I run a highschool network where wireless access is controlled by a HP MSM760 controller.It controls at the moment 58 HP MSM430 wireless access-points, and I'm very pleased with it.Also I've set the...
View ArticleRe: ARP conflicts on a MSM760 controlled wireless network
Hi !What is thefirmwareversion of5500 ??There is an update that fixestheproblem ARP and MAC informed below...
View ArticleRe: ARP conflicts on a MSM760 controlled wireless network
Software Version5.20.99 Release 2220P10Hardware VersionREV.CBootrom Version707
View ArticleMSM310-R Problem booting
Hello all,I have in my possession a MSM310-r router (J9383A) which was in its box for about 6 years. I have started the AP so as to use it to cover a new area by connecting it to my MSM730 controlled...
View ArticleRe: ARP conflicts on a MSM760 controlled wireless network
I recommend you upgrade the switch !!!Below the releases that should solve your problems:A5500EI-CMW520-R2221 Changes in Operations 1. Changed the maximum ARP rate on a port that is enabled with ARP...
View ArticleRe: ARP conflicts on a MSM760 controlled wireless network
Thanks JohnThis looks af if it's the excact issue, that I'm dealing with.I found a newer version of the firmware, A5500EI-CMW520-R2221P25, which should be the current one.Have one question though,...
View ArticleRe: ARP conflicts on a MSM760 controlled wireless network
Hello Friend !I recommend the following update process:1 - Backup the switch configuration file.2 - Download the firmware "5500.EI-4800G_5.20.R2221P22" after update the bootroom file (btm) and binary...
View ArticleCertain devices not connecting to Access Point (E-MSM430)
Hello We have 3 APs in one part of a building. On these 3 APs, 3 Virtual Service Communities are created.No devices such as Android and iOS can connect to one of the VSC's. The other 2 VSC's are...
View ArticleUp to 150 Client on MSMS460 with 765 Wifi Controller
Controller firmware 6.5.3MSM460Is HP MSM460 can support up to 150 client in 1 AP?Is anyone use "meshing"?
View Article