Clik here to view.
Re: MSM certificates expire 5/16/20
Thanks Parnassus, however....New certs installed as per instructions DO NOT WORK with imc.I tested on a spare controller and would not connect. to IMC (unfortunately deleted the certs as per...
View ArticleRe: MSM certificates expire 5/16/20
Hello, Sorry for the delayed answers, I am currenlty OOO.The first thing I can think of is - maybe iMC doesnt trust the new CA root certificate and thats why an error is displayed. The advisory...
View ArticleRe: MSM certificates expire 5/16/20
Thx. Only just started looking into - this was FYI for anyone else. CA trust could be an issue - yes. Certs on imc are not something I've worked w. Time to learn I guess. i will check the logs and do a...
View ArticleHPE M220 AP - QOS or bandwidth limits per SSID
Trying to set up some sort of prefferred network for staff vs. guest wifi. I have an MSR20-10 enterprise router and 3 of these M220 AP's clustered. I'm running two SSID's on a single VLAN. I need...
View ArticleRe: AP sent a deauthentication request to client
I have the same issue , all Ap's disconnect the clients for about 4 sec every 10, 15 minutes :Client (mac='6C:88:14:EC:59:18') has successfully authenticated using 802.11 authentication on interface...
View ArticleClik here to view.
June 16-17: Online Expert Day
Please join us for the Online Expert Day on June 16-17 , 2020. Our Experts will be Live for 24 hours.More detailed information is available hereOnline Expert Day June 2020- Servers, Storage,...
View ArticleRe: HPE M220 AP - QOS or bandwidth limits per SSID
Hello, M220 is an entry level AP and misses a lot of the advanced bandwidth management and traffic prioritization features other models and brands have. I reviewed the documentation once again and...
View ArticleRe: June 16-17: Online Expert Day
Hello All, Don't miss out on the upcoming online Expert Day for HPE Products. You can be an expert on this day or post all your product-related queries to be responded by our finest and brightest...
View ArticleRe: HPE M220 AP - QOS or bandwidth limits per SSID
Thank you so much Emil. I believe this was a good workaround. However, using WPA/TKIP only limits throughput to 54Mbps. I need to limit it to about 5Mbps. So, I've decided to create another VLAN to...
View ArticleRe: MSM certificates expire 5/16/20
This has been resolved. IMC needs the certs as well. These should be in the next patch to IMC/WSM
View ArticleRe: MSM certificates expire 5/16/20
Good dayWhen i upload the cert under certificate and prvate key store i get the following error "Certificate found to have inappropriate starting or ending dates in regard to the product's system...
View ArticleMSM760 error uploading Certificate
Good day,I downloaded the zip file and followed the instruction but i got an error when uploading the cert under certificate and prvate key store i get the following error "Certificate found to have...
View ArticleRe: MSM certificates expire 5/16/20
Good morning, What is the current system time of your MSM controller? You can see it in the webUI in the lower left corner. Under Contoller ->Management ->System Time you can check how exactly...
View ArticleRe: MSM760 error uploading Certificate
Good morning, What is the current system time of your MSM controller? Is it correct?You can see it in the webUI in the lower left corner. Under Contoller ->Management ->System Time you can check...
View ArticleRe: HPE M220 AP - QOS or bandwidth limits per SSID
Hello,Yes, I agree this workaround is not very flexible.If you have a switch between the AP and the router, you have to configure the VLANs to match between the AP and the switch on the one hand and...
View ArticleInstalling firmware msm460
How to install firmware on the access point msm460 without access to the equipment settings? after clicking on the option "switch to autonomous mode" it resets and locks access. Thank you
View ArticleRe: Installing firmware msm460
HelloAfter switching the AP to autonomous mode you should have access to the webUI where you have a menu for updating the firmware. What exactly means that the AP locks access? You are not getting the...
View ArticleClik here to view.
Re: Installing firmware msm460
HelloThe procedure below was performed 1. Isolate the computer and the unit so they are not connected on a network with any otherdevices.Attach the crossover LAN cable from the PC to the LAN port of...
View ArticleClik here to view.
Re: Installing firmware msm460
follows the error complement, note that it has an error Validate image personality ... invalid: 1 when executing the switch operational mode command
View ArticleRe: Installing firmware msm460
Hello, If I am not wrong you have also an open support case at the moment. Maybe it is better for you to get the instructions from one point of contact. I will contact the colleague and we will...
View ArticleHPE MSM 560
Hi all !My device is failing to access the console, I want to upload the firmware to it, but keep reporting the error as shown. <HPE>%Apr 26 12:03:13:623 2000 HP...
View ArticleRe: HP MSM 560
Hello, The log messages you are seeing indicate that your HP 560 is running a Comware image at the moment. This is the case because this AP was previously controlled by an HPE Unified Wired WLAN...
View ArticleClik here to view.
Re: HP MSM 560
Hi!I used TFTP to download file image 6.5.0.0; but still could not load the image; The uploaded file could not be found from TFTP
View ArticleRe: HP MSM 560
Hello ,Thanks for the response and the screenshots!I see that you have entered the Comware Boot Menu and you have initiated the download from this menu. This is not the correct procedure. The fact that...
View ArticleRe: HP MSM 560
Hi !!Thank you very much. because it did and it worked as it wished.Thanks!
View ArticleHP MSM460
I have an MSM460 and I am having recovery problems, I would like the access point .cim.startup file to take the equipment via tftp
View ArticleRe: HP MSM460
Hello, The cim.startup files are not available on the official download page. Please contact your local HPE/Aruba support, report the issue of the AP and request a cim.startup file. The AP MSM460 has a...
View ArticleRe: Need the xxx.cim.startup for HP 560
I'm also looking for a .cim.startup file compatible with our MSM430. Its a brazilian version JL009-60011, brand new in the box and phone support told me they can't help...I've tried the 560 version...
View ArticleRe: HP MSM460
Hi , what should we do when the local HP phone support(Brazil) say they don't have access to this .startup firmwares anymore and the AP is absolete, so they can't do anything about it? I have two...
View ArticleRe: Need the xxx.cim.startup for HP 560
, I really think you should consider creating a completely new post instead. Creating a new post helps..dont know why
View ArticleRe: VSC to VLAN mapping on MSM765ZL Confussion
Thanks, Aarón.You said that it is in the manual, and I read it, but didn't connect the dots until I saw your post. So, thank you
View ArticleMSM 760 Controllers
HiOur 4 HP MSM 760 controllers does not display the radio and clients stats on the controllers anymore. The clients is connected to the AP but on the controller is shows no clients. When checking in...
View ArticleRe: MSM760 wireless client list empty
HiRecently having the same issues with my MSM760 controllers. Is their anyone to assist?
View ArticleRe: MSM 760 Controllers
Hello There is an issue with similar symptoms when the controllers resp APs are reaching uptime of 248 days or more.The following fixes are addressing this...
View ArticleRe: MSM 760 Controllers
Hi EmilTested with a controller that has 10 AP's on and rebooted it now. Thanks I can see clients is showing on the controller again.
View ArticleMSM760 Unknown Admin Password
I am working as computer engineer at a Private Hospital in Turkey. We have about 40 pieces of MSM 310 AP and 1 piece of MSM760 Controller. I dont know anything about these devices so I can not manage...
View ArticleRe: MSM760 Unknown Admin Password
Hi,Can you try with defaulut login/password:admin/adminor follow steps as mentioned in below link:https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0122193If config was saved earlier then...
View ArticleRe: MSM760 Unknown Admin Password
I tried admin/admin before asking here.As I said I tried this link which you shared with me
View ArticleRe: MSM760 Unknown Admin Password
Hi,I missed that you have already tried reset password BY EMERGENY user.Then you need to reset by factory default.When it is impossible to use the management tool due to the loss of the manager...
View ArticleRe: MSM760 Unknown Admin Password
Hi,Has my post helped you to answer your query?Thanks!
View ArticleMSM760 Wireless Controller with Muptiple VSC's (What setup is more secure?)
The controller is configured with 2 VSC's (Guest.wifi, Office.wifi) Option A (Not using the WAN Port on the controller) Connecting the LAN Port of the controller to a managed switch. This connection...
View ArticleRe: MSM760 Wireless Controller with Muptiple VSC's (What setup is more secure?)
HelloMaybe I better answer can be provided if we have more details about the configuration in both scenario. I can think of the following questions which can give us a better understanding of the...
View ArticleMSM422 .cim.startup needed (any version)
HI I managed to break a MSM422 that I flashed with a wrong firmware and now I would need any .cim.startup version for MSM422. I tried everywhere and I cannot find it. Can somebody please give...
View ArticleRe: MSM422 .cim.startup needed (any version)
Hello, The cim.startup images are not available for download from the public download page. But you can contact yout local support with the serial number of your AP and request the file.
View ArticleRe: Installing firmware msm460
I also need "460.cim.startup", can you help me,thank you so much!my email is “14192550@qq.com”，thanks!
View ArticleRe: MSM certificates expire 5/16/20
I've got a similar issue with IMC. Was it a case of loading them through the OS running the IMC server, or loading them into IMC itself?Thanks.
View Article3CRWDR200A-75 Firmware and WPA-PSK ?.
Hello, I wish to upgrade the firmware (from 2.3) as the Internet Access Policy doesn't seem to allow access, even when set to allow all IP's in a range to have access 24/7. Also some tabs are missing...
View ArticleRe: 3CRWDR200A-75 Firmware and WPA-PSK ?.
Hello,Unfortunately I dont know this product and dont have experience with it. It seems that it was discontinued shortly after 3Com was acquired by HP. That means I cannot answer your questions.I am...
View Articlesecure office Connect router ?.
Hello, i got officeConnect 108MBps 11ghow can i make it router secure? meaning how do i prevent people to surf through me? thanksalexsunny
View Article