Re: Port Scan on the MSM760 Wireless Controller
Can anyone explian why these ports must stay open, We know that they do but for a PCI audit there has to be a reason
View Articlerfmgr_ap: Error starting foreground scan on Radio (on 2.4GHz radio)
Hi,I recently upgraded my access-points to firmware 6.6.4. Since then, I observe some recurrent clients deconnections on several access points. I investigated in logs, and found this recurring line...
View ArticleMSM 760 CONTROLLER - NO WIRELESS SERVICES
We have 3 MSM760 teamed controllers, we have restarted controller since yesterday and since then one alarm is there for 1 controller with the reason 'Secure connection to controller went down'. . While...
View ArticleAntenna Radio Pattern for HP 560-AM
We are performing a wireless planner using Netscout Airmagnet Survery pro and it does not currently list the HP 560-AM as an option to perform the survey. Can you tell me what is the antenna radio...
View ArticleRe: Up to 150 Client on MSMS460 with 765 Wifi Controller
If you look at the radio configuration, you will see max 255 clients. However there is a very big BUT:Wireless is a shared, half-duplex medium - think of a hub. Max transfer rates depend on the...
View ArticleRe: Antenna Radio Pattern for HP 560-AM
can't find an official documentation however i can say it's omnidirectional as for MSM APs.here is the 560 specifications if you want a better understand of power/sensitivity based on band and data...
View ArticleMSM765/AP upgrade firmware step by step
Hello everyone,i need some info about MSM and AP upgrade firmware because i didn't make it ever.The upgrade activity concern 4 controller and 450APs on Hospital infrastructure so, to evaluate if...
View ArticleMSM 720 wireless can't ping wireless
Hi, I have an issue that I can't seem to figure out. I have a wireless network setup with an MSM 720. Right now my internal LAN 192.168.100.1 can ping my wireless 192.168..150.x and all device on...
View ArticleClik here to view.
Re: MSM 720 wireless can't ping wireless
Hi ! In the settings of the SSID/VSC -> Virtual AP, see if this enabled communication between clients, as image.
View ArticleRe: MSM765/AP upgrade firmware step by step
Hi !The Controllers workinTeaming?TheAP's arelocal orremote?Onceyouupdate thecontroller, itwilltriggerupdate to theAP's.Thedowntimewill depend on thedownloadthe newfirmware timeby the AP... which...
View ArticleMSM760 only 18 AccessPoints
Hello from Germany, I have a Problem with an older MSM760 witch Software 6.2.0.0-14963.There are 40 AccessPoints licensed, configurated are 20. Now the Problem is, that only 18 AccessPoints works...
View ArticleRe: Monitor MSM 760 from OpsView
Hi i found a script like this for nagioshttps://exchange.nagios.org/directory/Addons/Active-Checks/Check-AP-%28acces-point%29-under-a-MSM-760-series-%28like-MSM765%29/details but i get always the same...
View ArticleRe: Monitor MSM 760 from OpsView
Hello,try an query in tree above, for instancesnmpwalk -v 2c -c nageon <MSM_DNS_NAME> -Osq .1.3 | moreand check output. The first lines are device-info. The correct device?
View ArticleRe: Monitor MSM 760 from OpsView
Hi thanks for your update yes information are ok iso.3.6.1.2.1.1.1.0 "MSM760 - Hardware revision B - Serial number xxxxxx- Firmware version 6.5.0.1-19720"iso.3.6.1.2.1.1.2.0...
View ArticleRe: MSM760 only 18 AccessPoints
It can be Firmware bug or else try with below steps- reset the AP using reset button and connect back again-check the switch port configuration-upgrade the firmware to the latest stable version
View ArticleRe: how to add AP on Teamed Controller
Hi. You definitely need the AP to get the IP-address to join the controller. So, there are a couple of ways - first, the most simple if you've got one AP - manual - reset the AP to deafults, connect to...
View ArticleRe: MSM460
reset doesn't work, i still seesetup_arch: bootmemmpc85xx_rdb_setup_arch()arch: exit
View ArticleHP MSM760 Premium Mobility Controller not authenticating more than 250 users.
We have an HP MSM760 Premium Mobility Controller (J9420A) licenced for 40 AP's. We have a reproducable problem whereby only approx 250 users can authenicate at a time. If 30 users are removed from the...
View ArticleRe: HP MSM760 Premium Mobility Controller not authenticating more than 250...
CliveFoster wrote:I thought the MSM760 was licenced for 2000 concurrent connectionsAFAIK the 2000 users limit has two references: first, when MSM Controllers are "teamed" (with up to 5 MSM 760 and up...
View ArticleRe: HP MSM760 Premium Mobility Controller not authenticating more than 250...
Thanks for the reply. The HP Wireless controller MSM760 is running version 6.5.3.0 but will not verify more than 250 accounts.
View Article