Re: MSM760 upgrade to 6.6.2.0
HelloMost part of the APs are on the same network that the controler. The APs are all control local by the MSM760.I did the download of the firmware to the MSM760 via Web page and when the MSM restarts...
View ArticleRe: MSM760: APs are slow on getting synchronized after controller reboot
But I haven't firmware upgraded it - the controller has just been rebooted.Network seems okRegards, Lars.
View ArticleRe: MSM760: APs are slow on getting synchronized after controller reboot
Sorry, I justconfusing me. Good thingthe network isok !!
View ArticleRe: Connection problem in 5 Hz band. MSM765 Team
Hi,All problems solved with version 6.5.3.0. Version 6.5.0 seems to be very bad.Regards
View ArticleMSM Configuration/Implementation Guide
Guys,I found this guide and has helped me a lot with getting started.http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c02682324-2.pdf
View ArticleClik here to view.
Implementation WIFI network using MSM 760
Hello Forum,I am trying to implement WIFI network here and runing into problem.Below is the architecture.The problems:1) guest users traffic isn't going to FW interface - instead routing back to the...
View ArticleRe: MSM760 upgrade to 6.6.2.0
Hmm.I did!As thisstatusnow?The antennasareautomaticallydiscovered by theControlleroryou didtheprovisioningorDHCP toworkwiththis discovery?In this caseI suggestRebootthe AP andor...
View ArticleRe: Implementation WIFI network using MSM 760
Hi !Let's do it by steps (like the Jack :)).What is the status of the antennas that time? At its topology antennas are on the same network as Controller right? How is the discovery of the antennas for...
View ArticleRe: Implementation WIFI network using MSM 760
Hi johnk3rAPs and controller are on the same switch V1910 - with above config.We seemed to have another controller on the network 780 series @ parent company - connected our network via vpn to vpn...
View ArticleRe: Implementation WIFI network using MSM 760
Below article point us to root caused with AP discovery. DNS was added 2 days after HQ when they made their WIFI controller alive 4/5 days ago. Hence lost of comms to AP from 2.17 (controller).We...
View ArticleAPs not coming back after disconnecting from SW
Hi All,Not sure why I am having so much issues with MSM 760.Issues I had in my previous thread is now resolved and i have moved the domain to another. I had to re-add all AP after performing a factory...
View ArticleMSM760: APs are slow on getting synchronized after controller reboot
Wifi was reported slow, so I decided to reboot controller. After controller reboot LED on most access points are flashing sequential and one hour since the controller is back up after reboot, only 4 AP...
View ArticleRe: MSM466 not factory resetting or able to open in web browser - SSLv3 issue
I have the same issue on an MSM422 but the value change in FF to 0 does not work any longer :(the error is always: ssl_error_unsupported_version Is there a way to do a recovery update of some kind? My...
View ArticleRe: MSM760 Log Help
Hello PaulC1, do you found a solution for this problem? I get the same type of error every 5 sec. on the MSM760. It happened after an update on firmware 6.6.2.0-22792. We don't use RADIUS Accounting...
View ArticleRe: Implementation WIFI network using MSM 760
Hi John,Happy new year, all working now - I need to add Active route to ensure that guest traffic is forward to FW I/F 172.31.22.4 1Active routes ? Interface Destination Mask Gateway Metric Delete...
View ArticleRe: MSM466 not factory resetting or able to open in web browser - SSLv3 issue
Hello.,I created windows xp VM - do not update and connected the AP then upgrade to newer firmware.Hope this helps.Kind Regards, Michael
View ArticleRe: Need the xxx.cim.startup for HP 560
I also need this file - could somene post link here?Rgds
View ArticleMSM 760
I have some issues - HP support is telling me this is normal!! - I have problem believingISSUES:when I change settings – AP are not automatically sync - have to invoke manual sync - it wasn't like that...
View ArticleRe: MSM 760
It is indeed normal behavior that you have to manually sync your settings to the access points.Sometime you have to change multiple settings before the final setup to work. If you start pushing every...
View ArticleRe: MSM760 Log Help
The error suggest the wrong key used between wireless controller and radius-server.When the the controller can't authenticate against the radius, it can't see if the username excists or not. Hence the...
View Article