Re: Differents priorities en controller teaming 760
Thank you so much for your time...!!
View ArticleMSM775 Public Network implmentation question
We currently have an MSM775zl wireless controller implemented in our environment which we currently only use it for business clients / employees. It's been requested for a public network for customers...
View ArticleRe: MSM775 Public Network implmentation question
HiFor public html based authentication (portal redirection), you need to ensure following: (assuming DHCP server is an external DHCP server on the network side)- make sure the VSC profile is not the...
View ArticleRe: Differents priorities en controller teaming 760
You cant have priority configured when in Teaming. But if you are interested to have certain APs managed by specific controller out of the team, then either static provisioning or using DHCP option 43...
View ArticleRe: Differents priorities en controller teaming 760
Adding a bit to Ram's.When provisioned for L3 discovery, the APs will always try to connect to the controllers in the provisioning order. For example you provision APs in group A to associate with...
View ArticleRe: MSM 760
Hi Please see attachment - can you advised me on where to look for possible config issue that can result in failure to discover APs?This is once working and now it isn't - difficult to find what...
View ArticleReceive email alerts, alarms, events from an HP MSM 760 Wifi Controller &...
Hi,I need to be able to receive alerts/alarms about events on the HP access points and controllers. I cannot find any instructions for configuring email alerts and I am surprised it is proving so...
View ArticleAccess point restart
Does restarting an MSM 720 wireless controller actually restart the connected access points themselves? We occasionally find that an MSM 430 AP will stop accepting clients and need to be restarted....
View ArticleRe: Receive email alerts, alarms, events from an HP MSM 760 Wifi Controller &...
Maybe a TrapHost or Syslog host is a better option?I Believe Kiwi syslogserver has a free tool to get you started.
View ArticleRe: MSM 760
I assume your AP's and controller are in the same subnet (no routing).I also assume your controller is set up on it's LAN-interface and not on its internet-interface.In that case, you should select...
View ArticleRe: MSM 760
Hi Many thaks for coming back.Please see attached Network Diagram - Internet Port is connected to rest of the network, LAN is just used for giving out DHCP for clients and tunneling clinet data back to...
View ArticleRe: MSM775 Public Network implmentation question
Hi Ram,Thanks for the information. And i apologize for the late response. I was thinking i would get an email response when someone replied. Regarding your comment on DNS... I guess i don't quite...
View ArticleRe: MSM775 Public Network implmentation question
Let me add this as well. In your screenshot, i see you're using the "Always tunnel client traffic." Is this necessary? The reason i ask is because i've struggled with the concept and implementation...
View ArticleRe: MSM775 Public Network implmentation question
>I was thinking i would get an email response when someone replied. You need to enable that. For posts there is a box on right with: Email me when someone repliesOr in your profile you can enable...
View ArticleRe: MSM 760
Its all sorted - AC is now redicovering the APs.The fact that AC was reseted and older configured restoed furthermore APs were hard resetted few times - must of introduced untrust between AC and AP...
View ArticleRe: MSM760 Log Help
I have a customer with the same error under 6.6.2:iprulesmgr: Discarding RADIUS Accounting Request (id='99') from RADIUS Client (ip-address='169.254.0.59',port='34006') because of missing username....
View ArticleRe: Need the xxx.cim.startup for HP 560
Hello,could you please send me the link i have the same problem.B.R
View ArticleRe: MSM760 Log Help
We're having the same problem, also 6.6.2. Setting the "correct" key isn't the awnser in our case.To make it more fun, the Radius accounting to our Windows NPS/Radius server is working perfectly, even...
View ArticleRe: MSM760 and APs over multiple subnets
Hello all!I have an WX3024 Controller with WA2620AGN Aps and i'm experiencing problems to made APs connect to WX3024 in different vlans with dhcp option 43.I only can do this work by dns...
View ArticleDHCP services option greyed out
I'm trying to use DHCP services on my controller to give out IP addresses for Guest Internet VSCs. Previously each VSC was configured with "Use the following server" option which resulted in guest...
View Article