It is indeed normal behavior that you have to manually sync your settings to the access points.
Sometime you have to change multiple settings before the final setup to work. If you start pushing every single change to your AP, you're at risk losing AP-Controller connectivity. And that's not something you want when they aren't next to you on your desk :)
Regarding the loss in connectivity after disconnecting and reconnecting, suggest there's something wrong with your discovery settings AND/OR port settings of the AP.
Maybe you are pushing the wrong default VLAN-setting to your AP, or didn't enable manageability on that new interface from the controller.
↧
Re: MSM 760
↧