Re: HPE M220 AP - QOS or bandwidth limits per SSID
Hello,Yes, I agree this workaround is not very flexible.If you have a switch between the AP and the router, you have to configure the VLANs to match between the AP and the switch on the one hand and...
View ArticleInstalling firmware msm460
How to install firmware on the access point msm460 without access to the equipment settings? after clicking on the option "switch to autonomous mode" it resets and locks access. Thank you
View ArticleRe: Installing firmware msm460
HelloAfter switching the AP to autonomous mode you should have access to the webUI where you have a menu for updating the firmware. What exactly means that the AP locks access? You are not getting the...
View ArticleClik here to view.
Re: Installing firmware msm460
HelloThe procedure below was performed 1. Isolate the computer and the unit so they are not connected on a network with any otherdevices.Attach the crossover LAN cable from the PC to the LAN port of...
View ArticleClik here to view.
Re: Installing firmware msm460
follows the error complement, note that it has an error Validate image personality ... invalid: 1 when executing the switch operational mode command
View ArticleRe: Installing firmware msm460
Hello, If I am not wrong you have also an open support case at the moment. Maybe it is better for you to get the instructions from one point of contact. I will contact the colleague and we will...
View ArticleHPE MSM 560
Hi all !My device is failing to access the console, I want to upload the firmware to it, but keep reporting the error as shown. <HPE>%Apr 26 12:03:13:623 2000 HP...
View ArticleRe: HP MSM 560
Hello, The log messages you are seeing indicate that your HP 560 is running a Comware image at the moment. This is the case because this AP was previously controlled by an HPE Unified Wired WLAN...
View ArticleClik here to view.
Re: HP MSM 560
Hi!I used TFTP to download file image 6.5.0.0; but still could not load the image; The uploaded file could not be found from TFTP
View ArticleRe: HP MSM 560
Hello ,Thanks for the response and the screenshots!I see that you have entered the Comware Boot Menu and you have initiated the download from this menu. This is not the correct procedure. The fact that...
View ArticleRe: HP MSM 560
Hi !!Thank you very much. because it did and it worked as it wished.Thanks!
View ArticleHP MSM460
I have an MSM460 and I am having recovery problems, I would like the access point .cim.startup file to take the equipment via tftp
View ArticleRe: HP MSM460
Hello, The cim.startup files are not available on the official download page. Please contact your local HPE/Aruba support, report the issue of the AP and request a cim.startup file. The AP MSM460 has a...
View ArticleRe: Need the xxx.cim.startup for HP 560
I'm also looking for a .cim.startup file compatible with our MSM430. Its a brazilian version JL009-60011, brand new in the box and phone support told me they can't help...I've tried the 560 version...
View ArticleRe: HP MSM460
Hi , what should we do when the local HP phone support(Brazil) say they don't have access to this .startup firmwares anymore and the AP is absolete, so they can't do anything about it? I have two...
View ArticleRe: Need the xxx.cim.startup for HP 560
, I really think you should consider creating a completely new post instead. Creating a new post helps..dont know why
View ArticleRe: VSC to VLAN mapping on MSM765ZL Confussion
Thanks, Aarón.You said that it is in the manual, and I read it, but didn't connect the dots until I saw your post. So, thank you
View ArticleMSM 760 Controllers
HiOur 4 HP MSM 760 controllers does not display the radio and clients stats on the controllers anymore. The clients is connected to the AP but on the controller is shows no clients. When checking in...
View ArticleRe: MSM760 wireless client list empty
HiRecently having the same issues with my MSM760 controllers. Is their anyone to assist?
View Article