Hello ,
Thanks for the response and the screenshots!
I see that you have entered the Comware Boot Menu and you have initiated the download from this menu. This is not the correct procedure. The fact that you can see the Comware boot menu means that you didnt follow the steps exactly. Especially step 5 of Load Method 2: Using TFTP.
5. Using a paper clip, press and hold the AP reset button until the AP status LEDs flash at a rate of
approximately twice/second (the LEDs will initially flash at a slower rate before flashing at the faster
rate), then release the reset button.
The AP starts up in TFTP boot mode.
If you can access the Comware boot menu this means that the AP is not in a TFTP boot mode. Please repeat the procedure following the steps exactly as described in the document. Dont use the Bootware Menu to do anything. Try to use TFTP from a Windows machine as described in the document. If you prefer using TFTPd have a look at this document for more details.
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c02684335