HTML-based auth and "always tunnel client traffic"
Hiin my teamed MSM760 (ver 6.5.0.1-19720) I'm using an access controlled VSC with HTML-based user login with external RADIUS Authentication.There is a way to uncheck the "always tunnel client traffic"...
View ArticleWireless MSM 460 mac-authentication some time does not work
We are using mac based authentication on MSM 460 APs. Some time our client can not get IP adress from DHCP (actulally DHCP request packet can not reach to DHCP server ). In GUI panel, Wireless...
View ArticleBasic question about Team Controller - MSM720
Hi ! CommunicationTeamControllerworks bothon the Internetport astheportlan?As theAP'scommunicatewith members/ managerof theteam?Note: Ialreadyreadthe documentation, I'm just wanting to takesome...
View ArticleApple Airplay and MSM 720
Hello, I have a MSM 720 controller and MSM460 Access Points running version 6.3.0.2. I have an apple TV connected and an iPad and am unable to use airplay (the icon is not displayed on the ipad), so it...
View ArticleHP 425 AP network problems
Hi all, At the moment i am having a realy anoying problem with these HP 435 AP.I have MSM 720 controller and 8 HP 435 AP which are connected to the controller via LAN using PoE. MSM 720 is connected to...
View ArticleRe: MSM760 - Clients loosing network connectivity (ping times 5-10 full...
Do you have all your VLAN's defined on all of your switches? I ran into the same thing and the cause was that I missed setting up a few switches properly / defining the VLAN's.
View ArticleMSM760: VSC Signals continue going up and down
hi all, we have this problem since ages (and different fw levels): our ap were all MSM310 operating at 2.4 GHz, with autochannel selected. Performance is quite bad: using simple tools (smartphone app...
View ArticleRe: HP 425 AP network problems
Whichswitch portstatuswhen this problem occurs?TheControlleralsolosecommunication withthe access points??Is there anyerrorlogswitch /controller /AP?
View ArticleMSM720: internal VSC works but guest doesn't
Hi guys, we are not able to setup our MSM720 to provide guest-access. The VSC for internal access works fine (connected MSM via trunked port (port 1) to switch and using the egress setting). If we try...
View ArticleHow to use both radios in MSM320
Hi, We have a new customer running a hotel with a MSM760 controller with 12 MSM320 AP's. The MSM320 are installed on what we call common areas like the reception lobby, 2 restaurants and 2 bars. In...
View ArticleRe: How to use both radios in MSM320
I do not seeany problemyouuse bothradios.Alwaysuseboth radios formy clients.I do not knowthis model ofAP,but oneis forradiofrequency2.4 andthe other5.0GHz.
View ArticleClik here to view.
Re: How to use both radios in MSM320
Hi, It's a MSM320 and only have 2.4GHz radios, that's why I'm asking if it's OK to turn both on and if I have to do any other setup beside that? Current configuration:
View ArticleRe: HP 425 AP network problems
Controller also lose connection to those accespoints. But if i try to ping AP-s from any computer in company there is still ping timeout, high ping numbers.At this time if i ping controlloer itselfe...
View ArticleMSM 720 IPsec SHA1 or 2 HMAC
Hello, I have a MSM 720 with 5.7.4.0-16222 I had established an IPSec connection. I need to enable esp-sha1-hmac or sha2. Now the ipsec is running with ESP AES-256 MD5 esp-md5-hmac How can i change the...
View ArticleRe: How to use both radios in MSM320
Hello.No configurationwill benecessary, unlessyouwant to set upsomething specificon the radio.Enable theradioanddothe necessarytests...
View ArticleRe: Guest Management Software (GMS) 6.3 - Account State not refreshing /...
Hi, Don't know if this is still active but it has a lot of view so... The GMS can not check the state if you use controller based subscription plans. I was also looking for this problem and came out on...
View ArticleRe: How to use both radios in MSM320
HI, Thanks for your quick help. And the two radios working togther will help the high number of active clients connected?
View ArticleRe: How to use both radios in MSM320
Not necessarily.There are severalvariables to be analyzedto checkthe maximumnumber of clients perAP. Thetopic belowcan helpin this question......
View ArticleMSM 710 keeps rebooting every 30 mins
HI All not had a problem with our MSM 710 since Install Recenetly it hs started restating every 30 mins or so Lots of errors in the logs that keep appearing every few secs i cant work out what they...
View ArticleMSM430 Signal Fluctuation
I have a number of MSM430 APs operating autonomously, powered from an HP1910 POE switch. Each has 4 SSIDs and 4 VLANs. The problem is that the signal strength fluctuates wildly even when the receiving...
View Article