Re: MSM410 / J9427B - How to upgrade firmware
wrote:Hi, Please find link to download the firmware for this Access point, hope its a standanone AP.https://h10145.www1.hpe.com/downloads/SoftwareReleases.aspx?ProductNumber=J9427BRelease notes in...
View ArticleRe: MSM410 / J9427B - How to upgrade firmware
Hi,I think you need to have a support contract to download the software.
View ArticleRe: "lost" MSM430 from MSM710
Hi, What is the IP Address that you are trying to ping or access. If you are tyring to ping any user defined IP address, try to ping 192.168.1.1 (Factory default IP) from your PC (Eg: by configuring...
View ArticleRe: "lost" MSM430 from MSM710
Hi Fishow,Did anything change? lightning? power outage?1. Reset ap - uplug ap, hold reset button, plug ap in. release reset button once all the lights flashed 3x time. The ap goes into a different mode...
View ArticleRe: "lost" MSM430 from MSM710
Thanks for all the replies!Meantime I had a chance to contact HPE Support and after several tests also via shared screen, they sent a replacement - and that works. So most probably the 4 devices from...
View ArticleMSM765 ath_txq_stuck_checker System Log Critical Errors
Any one else seeing these errors? I started seeing these a few days ago after noticing a large increase in snmp traffic. Here is a sample:Feb 8 10:14:38.799 crit MacAddress of AP kernel:...
View ArticleRe: MSM410 / J9427B - How to upgrade firmware
wrote:Hi,I think you need to have a support contract to download the software.How do I do that and how much does this cost?This unit is only capable of 300Mbits/s which is no no longer cuirrent...
View ArticleRe: MSM410 / J9427B - How to upgrade firmware
If you make an HPE account and try using the serial # of the device, it will only allow one to dowload the firmware that was allowed during the "entitlement" period for that AP. I tried with one I...
View ArticleRe: MSM410 / J9427B - How to upgrade firmware
Support agreement part numbers can be found here by entering a serial number:http://ssc.hpe.com/portal/site/ssc/I tried it for an MSM460 and the lowest priced agreement was $47 retail (might do better...
View ArticleRe: MSM765 ath_txq_stuck_checker System Log Critical Errors
Hi,As per internal update, these are nomral recovery mechanism messages. This version (6.6.9.0) is introduced wth new recovery mechanisms to mitigate "stuck queue" issues and is related to soft reset...
View ArticleRe: MSM410 / J9427B - How to upgrade firmware
wrote:If you make an HPE account and try using the serial # of the device, it will only allow one to dowload the firmware that was allowed during the "entitlement" period for that AP. I tried with...
View ArticleMSM760 Firmware Files
Hi there , I need to upgrade firmware msm760 controller from 6.2.1.0 to 6.5.3.0 and 6.6.9.0 , but I cant download firmware files because of the support. Could someone help me to get firmware files for...
View ArticleMSM775 Controller
I have recently lost the ability to log into the MSM775 Web GUI With any passwords. When using the services command i get an error that saya "no services installed". This controller has been up and...
View ArticleRe: MSM410 / J9427B - How to upgrade firmware
wrote:Support agreement part numbers can be found here by entering a serial number:http://ssc.hpe.com/portal/site/ssc/I tried it for an MSM460 and the lowest priced agreement was $47 retail (might do...
View ArticleRe: MSM410 / J9427B - How to upgrade firmware
wrote:If you make an HPE account and try using the serial # of the device, it will only allow one to dowload the firmware that was allowed during the "entitlement" period for that AP. I tried with...
View ArticleMSM760 Storage Failure
Hi,I am having a problem with my MSM760 controller. I were unable to rejoined my AP which was rebooted. The log says the following error:Mar 22 02:06:52 err kernel end_request: I/O error, dev sda,...
View ArticleRe: MSM760 Storage Failure
Hi,What is the software version running on the controller. Seen these kind of messages for another controller and after an upgrade the issue is fixed. If the code running is older, try upgrading to...
View ArticleMSM 760 controller recovery image
Greetings,We have MSM760 controller which worked fine for few years, but recently refused to load system after reboot.I powered it on with Hyperterminal / console cable and saw that after BIOS POST...
View Article