RRM - "Cannot start RRM analysis, please wait for the network to become stable."
Hello,I have two teamed controllers MSM765 and 62 access points (MSM460 & MSM466). For a few weeks, I am not able to start an RRM analysis. Neither manually, nor scheduled. Error message is:Cannot...
View ArticleRe: RRM - "Cannot start RRM analysis, please wait for the network to become...
Opened support case 5322709868.
View ArticleMSM760 with MSM430 AP, random drop and lose of SSID
Hello,I've been struggeling with this issue for a while and i just want to rip the APs down and throw them in the trash.About an half a year ago our network start acting all strange, you were connected...
View ArticleRe: MSM760 with MSM430 AP, random drop and lose of SSID
Hey Marduk,this sounds like a serious issue to me. Have you tried opening up a support case with HPE?Best,Ascendor
View ArticleWifi solution fo guest users
Hi,we have HP MSM720 Controller with HP access points, and our every guest user uses the same password and accesses guest VLAN.I have an idea to randomly generate 100 passwords, give session for 4...
View ArticleAP sent a deauthentication request to client
I am trying to debug an issue our clients have. Occasionally they drop the connection. To be precise, their device (in my current case, Apple iPhone) shows the connection symbol, but no data flow is...
View ArticleNo IP listed for many connected devices
I have pages and pages of connected devices on our MSM760 that do not show the client IP. All devices show 0.0.0.0, yet there are many more pages with active IP addresses. Any idea what would be...
View ArticleRe: No IP listed for many connected devices
Have you checked how long the clients have been connected? (Column: "Duration")My guess would be that they don't have an IP address yet because they just connected.
View ArticleRe: No IP listed for many connected devices
That does hold true for a fair amount of blank entries. However, there are many within a good signal range that have been connected for 8-30 minutes, with no IP address.
View ArticleHP ProCurve MSM760
Good afternoon. We have in stock a Wi-Fi controller HP MSM760 (Serial No. SG0023N005) Worked up to a certain point well. I do not know what happened but it does not connect. On the LED display, the...
View ArticleRe: MSM460
This worked a treat. I don't thinks its 3 blinks though. I hit the reset button, blinks once after a few seconds. Thereafter I waited another 3 blinks and on the third I let go. Thanks!
View ArticleHP ProCurve MSM760 System BIOS shadowed
Good afternoon. We have in stock a Wi-Fi controller HP MSM760. Worked up to a certain point well. I do not know what happened but it does not connect. On the LED display, the inscription "HP ProCurve"...
View ArticleRe: No IP listed for many connected devices
Then I'm out of ideas. Check your DHCP server log maybe?
View ArticleClik here to view.
Re: Wifi solution fo guest users
Actually I downloaded and configured Access Management System. Here are configs in a picture. But users are still loging with ussual password. What should be done further?
View ArticleRe: MSM760 with MSM430 AP, random drop and lose of SSID
Hi,I'm having some problems. too.Do you have Severe interference detection/mitigation enabled and are you getting "Sep 13 09:07:54.454 warn xx:xx:xx:xx:xx:xx rfmgr_ap: Scan type (2), new Scan type...
View ArticleRe: RRM - "Cannot start RRM analysis, please wait for the network to become...
HPE support found the cause. One access point was repeatedly losing connection to the controller (exactly every 5 minutes for some strange unknown reason). After factory resetting the access point, the...
View ArticleRe: MSM760 with MSM430 AP, random drop and lose of SSID
Hi Marduk,I had almost the same problem. It turned out to be the DFS channels causing the problem.The HP MSM equipment are compliant to many regulatory standards some of which will cause automatic...
View ArticleClik here to view.
Wireless MSM720 Controller guest account problems
Hi,We have successfully integrated Guest Management System wit MSM720. But after user authenticates via web browser, access to internet is no longer available. Is there some parameters that should be...
View Article