Re: HP 560 (ww) needing a reboot daily
Thanks for the idea, Merminger. I looked through the config and found all of the rei-off-channel-scanning settings are enabled.
View ArticleRe: HP 560 (ww) needing a reboot daily
I had an AP acting up this morning and saved the log file. This line was repeated over and over and filled the log: Feb 20 06:10:54.206 err kernel: Setting frequency to 246200000 exp1 in r2v2...
View ArticleRe: HP 560 (ww) needing a reboot daily
Hi BrewCrew,That may be RRM that wants to change channels on the radios, but there could be something else already broadcasting on channel 11. Try to remove channel 11 from the list of channels...
View ArticleM330 Access Point CLI
I'm working on a few M330 Access Points (JL062A) but I am unable to locate a reference guide for the CLI commands for this product line. Does anyone have a link to such a document? All I'm really...
View ArticleMSM765zl team Radius packets sourced from AP
Hi,I have a team of 4 MSM765zl that are working fine. I have an SSID with 802.1x enabled and all the Radius access-request packets are sended by the controllers IP address to the Radius server. Is...
View ArticleRe: MSM760 Upgrade Contact
Right, I didn't think about that, makes sense :DYou will need to contact one of our sales partners. List of local partners you can find at your local country HPE website.I'm sorry but I forgot one...
View ArticleRe: MSM765zl team Radius packets sourced from AP
Hello,as far as I know this should be accomplished by removing the checkbox for the "authentication" in the global settins on the...
View ArticleMuiltiple Vlan mapping though single ssid
Hi I'm having MSM765 Integrated Controller.I want to create single ssid and i need to map multiple vlans into that.We have a requirement for dynamic vlan mapping inorder to pass mulple vlans trhough...
View ArticleMSM 765 Integrated Controller - Different vlan single SSID
HI,we need to make single ssid where muliple vlans are mapped into it. Is it possible in MSM760 Integrateed Controller
View ArticlePortail captif sur MSM775
Bonjour,Je désire mettre en place un portail captif sur un controleur MSM775.L'authentification se fait à l'aide d'un Radius, et ensuite on bascule les utilisateurs dans le bon VLAN afin de leur...
View ArticleMSM 765 and MSM 410 AP - SNMP Configuration
We have 50+ MSM 410 in the network. Currently we are using PRTG to monitor all network devices including MSM765 and all managed APs. PRTG auto discovery only detected some simple sensor such as traffic...
View ArticleRe: HP 560 (ww) needing a reboot daily
Removing channel 11 did not help and as far as I know there isn't anything running radar that would penetrate into those areas of the building. After doing some reading I decided to change the...
View ArticleNeed help, firmware for MSM765z
Good time of day.Anyone have premium access to the portal network equipment HP, help please download the firmware and software for the mobile network controller HP MSM765z.The link on the download page...
View ArticleMSM 720 Guest network
I have been racking my brain for well over a week now trying to figure out how to segregate guest network using a HP MSM720 and creating 2 SSIDs guest and employee. Right now both networks DHCP are...
View ArticleRe: MSM 720 Guest network
If i turn the the egress from default to the vlan id 12 on my guest network i cannot access my main 10.0.10.0/24 network however i can access the 10.0.11.0/24 network and with changing that egress...
View ArticleRe: Remove the binding before deleting the VSC
Left side of your controller you have to click default group where all your APs reside, then at the top you should see vsc bindings. This took me a while to find myself a few days ago.
View ArticleRe: Remove the binding before deleting the VSC
Left side of your controller you have to click default group where all your APs reside, then at the top you should see vsc bindings. This took me a while to find myself a few days ago.
View ArticleRe: MSM 720 Guest network
As it looks now, one port is configured for all vlan traffic, so i dont know if this is correct, if one AP is broadcasting 2 networks, the port that that AP connects to would have to allow traffic both...
View ArticleMsm760 Password forgotten solution
I've tried everything but I could not find the reset, etc. I have not found any options. Can you help me? (herşeyi denetim fakat sonuç alamadim resetleme vs hiç seçenek bulamadim yardim edermisiniz)...
View Article