Clik here to view.
Re: Second team member is in loop(Resetting, Uploading Config.) after 6.6.5...
Thank you for your help,I checked all my settings again. And I changed Vlans config and then manager synced with member succesfully.I think in my system, a group error of 0.11 is a vlan error. Member...
View ArticleController not detecting APs
My company has a MSM 720 (running 6.6.5.0) and everything worked great until somewhat recently. Since an undetermined time ago whenever the APs lose power or are uplugged for maintenace, they are...
View ArticleMSM 517 - no lifetime warranty?
do someone know, why the WLAN AP MSM517 will be not exchanged by the lifetime warranty? We have 12 failed Access Points with open cases, but no exchange. Why?
View ArticleSome of MSM460 AP's Showing Very High Transmitted Core Traffic in AP...
Hello,In our organisation we are having wireless network with 400 numbers of MSM460 AP's which are connected with MSM 765 Controllers. We are generating a daily report of our AP's through IMC. Some...
View ArticleHP MSM720 Flexconnect "cisco" option
Hello Guys , I have a HP MSM 720 Controller in a site with its APs controlled and working fine . I will need to connect APs in another bransch (another subnet) and need to work with the same corporate...
View ArticleRe: HP MSM720 Flexconnect "cisco" option
Hello,This seems certainly like something that can be achieved, however it is not called "Flexconnect". I am assuming that you configured the SSID without "User Controller for Access Controll" because...
View ArticleRe: HP MSM720 Flexconnect "cisco" option
Hello Emll Thanks for your concern , I already created a group "L3 Discovery" and I didn't check egress network so that the traffic is untagged , to get you a full view , the WLC and the local APs...
View ArticleHP MSM 720 Premium Mobility
We are running a HP MSM PREMIUM MOBILITY the problem i have is that vsc profile was erased but the ssid for this vsc profile still appears and it must dissapear
View ArticleRe: HP MSM 720 Premium Mobility
Also when i try to synchronize any AP it always shows like this AP_TSI_01 , 05 and 06 are the AP´s synchronized
View ArticleRe: Controller MSM760 not synchronizing all detected AP
Siri have hp controller msm760.it is not syn all AP in network and i have config 40 AP. AND I go to maintence-licences it is not showing anything.
View ArticleMSM760 Upgrade Contact
I have a J9420A HP MSM760 Premium Mobility Controller with Software version: 5.7.3.0-13117 and I understand the upgrade path will be a coupl eof steps but I need a good POC to be able to renew...
View ArticleMSM720 HTML Authentication with 3rd party wildcard certificate
Hey there! I have an MSM720 with some access points. I currenlty have a VSC setup as a 'guest' network that uses html authentication agains a local list of users. It works fine. Today I added our...
View ArticleRe: Controller MSM760 not synchronizing all detected AP
The factory-installed 40 AP license does not show in Maintenance / Licenses tab. However depending on your FW version you should see "Supported Authenticated APs" with note "Permanent" and number 40.
View ArticleRe: MSM760 Upgrade Contact
I don't really know what you mean with "good POC" as "POC" generally refers to Proof Of Concept.You're currently running outdated version of 5.7. Last version on that platform is 5.7.8.1, Release Notes...
View ArticleRe: MSM760 Upgrade Contact
Or "Point of Contact". What is a good point of contact for a post warranty SW support contract?Thank you!
View ArticleMSM 430 - VSC VLAN ID not available
Good day,I recently aquired and configured the subject device. I'm now attempting to setup a specific VLAN under a VSC. I've read the documentation and extensively online, but am stuck at something...
View ArticleRe: MSM 760 Hidden network problem (slow show up)
Hiding an SSID is sometimes used as a security measure. It isn't. Hidden networks are known to be problematic, so using them is not advisable. This isn't MSM-specific, this is general wireless....
View ArticleRe: MSM720 DHCP for new VSC
I'd start by configuring the DHCP relay in the VSC itself instead of connecting switch. Does this change the situation?
View ArticleRe: HP Procurve MSM32X Outdoor Dual Radio AP
Unfortunately that article is outdated. The download link points to old hp.com network, so it's not available anymore. Fastest way to get the Reset script is contacting your local Technical Support.
View ArticleClik here to view.
Re: Second team member is in loop(Resetting, Uploading Config.) after 6.6.5...
Thank you for your help,I checked all my settings again. And I changed Vlans config and then manager synced with member succesfully.I think in my system, a group error of 0.11 is a vlan error. Member...
View Article