We have had various issues with our wifi which is an msm760 with approximately 150 AP's, (HP560, MSM460 primarily)
We an SSID with Radius enabled but sometimes users just cannot connect or if they are connected they sometimes get kicked off and then struggle to reconnect. The signal stregth is good in all areas.
I looked at the logs from the MSM760 and there are an awful lot of entries (1000's) as below at a rate of 10+ a second.
The ip/id/port are different for each entry.
Discarding RADIUS Accounting Request (id='36') from RADIUS Client (ip-address='169.254.0.60',port='32880') because of missing username. (Check your RADIUS Secret configuration.)
Does anybody know what may be causing the issue.
Thanks in advance if anybody can offer any assistance.